PGW-LU
Cable ladder type U
C-section side rails with inward lips and U 45 x 20 mm rungs. The most widely used type for indoor and outdoor routes.
- Width
- 100 to 1,200 mm
- Height
- 50, 100 mm
- Best for
- Commercial buildings, Factories, Panel rooms
Hot-dip galvanized cable ladder: type U, type W and heavy-duty
Short answer
A cable ladder is a ladder-shaped cable support: two steel side rails joined by rungs every 300 mm. The open structure lets air circulate around the cables, and large-diameter cables are easy to tie down to the rungs. Choose cable ladder for medium- and low-voltage power cables, main (backbone) routes and support spans of 2 to 3 m.
- ISO 9001:2015
- Our partner manufacturer holds ISO 9001:2015 quality management system certification.
- 360 kg @ 2.5 m
- Independent laboratory load test: type W ladder 1,000 x 100, 2.0 mm thick, 10 mm deflection, NEMA VE 1 class 10A.
- HDG BS 729
- Hot-dip galvanized after fabrication, so cut edges and holes are coated too.
- 1.8 to 2.0 mm
- Hot-rolled SPHC steel sheet. The thickness is stated on every quotation.
Cable ladder types
PGW-LW
Cable ladder type W
W-section (double-folded) side rails for higher stiffness. Carries heavier cable loads without a thicker sheet.
- Width
- 100 to 1,000 mm
- Height
- 100 mm
- Best for
- Pipe racks, Power plants, Dense cable routes
PGW-LHD
Heavy-duty cable ladder
127 mm and 152 mm rails for large power cables, long spans and heavy industrial environments.
- Width
- 100 to 1,000 mm
- Height
- 127, 152 mm
- Best for
- Smelters, Coal-fired and combined-cycle power plants, Oil and gas
Available cable ladder sizes
Standard length 3 m. Ask for a quotation on any size directly on WhatsApp, or send your full BOQ below.
| Width | Ladder U H100 | Ladder W H100 | Ladder HD H127 | Ladder HD H152 | Action |
|---|---|---|---|---|---|
| 100 mm | 100 x 100 | 100 x 100 | 100 x 127 | 100 x 152 | Request a quote |
| 150 mm | 150 x 100 | 150 x 100 | 150 x 127 | 150 x 152 | Request a quote |
| 200 mm | 200 x 100 | 200 x 100 | 200 x 127 | 200 x 152 | Request a quote |
| 250 mm | 250 x 100 | 250 x 100 | 250 x 127 | 250 x 152 | Request a quote |
| 300 mm | 300 x 100 | 300 x 100 | 300 x 127 | 300 x 152 | Request a quote |
| 350 mm | 350 x 100 | 350 x 100 | 350 x 127 | 350 x 152 | Request a quote |
| 400 mm | 400 x 100 | 400 x 100 | 400 x 127 | 400 x 152 | Request a quote |
| 450 mm | 450 x 100 | 450 x 100 | 450 x 127 | 450 x 152 | Request a quote |
| 500 mm | 500 x 100 | 500 x 100 | 500 x 127 | 500 x 152 | Request a quote |
| 600 mm | 600 x 100 | 600 x 100 | 600 x 127 | 600 x 152 | Request a quote |
| 700 mm | 700 x 100 | 700 x 100 | 700 x 127 | 700 x 152 | Request a quote |
| 800 mm | 800 x 100 | 800 x 100 | 800 x 127 | 800 x 152 | Request a quote |
| 900 mm | 900 x 100 | 900 x 100 | 900 x 127 | 900 x 152 | Request a quote |
| 1000 mm | 1000 x 100 | 1000 x 100 | 1000 x 127 | 1000 x 152 | Request a quote |
Fittings for every bend and branch
- Horizontal elbow90° flat bend, radius or diagonal type.
- Horizontal teeThree-way branch, radius or diagonal type.
- Horizontal crossFour-way branch.
- ReducerWidth reduction: center, left-hand or right-hand.
- Inside and outside riser90° bend up or down for changes in elevation.
Technical data
- Width (W)
- 100 to 1,200 mm
- Rail height (H)
- 50, 100, 127, 152 mm
- Rung spacing
- 300 mm (150 mm from the ends)
- Rung profile
- U 45 x 20 mm, 10 x 55 mm slots
- Material
- Hot-rolled sheet steel (SPHC)
- Sheet thickness
- 1.8 to 2.0 mm (other thicknesses to order)
- Standard length
- 3,000 mm per length
- Finish
- Hot-dip galvanized (BS 729, DIN 50976), electro-galvanized, powder coating
- Design reference
- NEMA VE 1 for cable tray and cable ladder
- Splice holes
- 10 x 14 mm slots, 25 and 50 mm from the end
Questions about cable ladder
When should I choose cable ladder over cable tray?
Choose cable ladder for large-diameter power cables, main routes and support spans of 2 to 3 m. Choose perforated cable tray for small cables, control and instrument cables that need a continuous base so they do not sag between rungs.
What load can a cable ladder carry?
The product is designed to NEMA VE 1. An independent laboratory load test on a type W ladder 1,000 mm wide, 100 mm high and 2.0 mm thick over a 2.5 m span recorded 360 kg exactly at the allowable deflection of 10 mm (1/250 of the span, NEMA VE 1 class 10A), and the sample carried up to 550 kg per span. Actual capacity depends on width, rail height, sheet thickness and support spacing, so send us your span data and we will calculate it.
Can cable ladder be installed vertically?
Yes. Use inside or outside risers for the change of direction, then clamp the cables to the rungs every 300 to 600 mm so the cable weight does not hang on the terminations.
How long is one cable ladder section?
The standard length is 3,000 mm. Other lengths can be made to order for project requirements.
Send us your BOQ and we will prepare the quotation.
- 01
Send your requirements
A BOQ, layout drawings, site photos, or simply a list of sizes.
- 02
Receive a complete quotation
Straight sections, fittings, supports, clamps and bolts in one document, with the delivery cost.
- 03
Delivered to your site
Bundled by size and shipped from Bekasi to match your project schedule.
Fast replies during business hours · Monday to Friday 08:00 to 17:00, Saturday 08:00 to 13:00 (WIB, UTC+7)
Chat on WhatsApp nowOr fill in the short form
Once it is sent, you can continue straight to WhatsApp to share your BOQ file.