PGW-TU
Perforated cable tray type U
Straight side walls with an inward lip. The most common shape, easy to splice and to fit with a cover.
- Width
- 100 to 1,000 mm
- Height
- 50, 100 mm
- Best for
- Control cables, Buildings, Panel rooms
Perforated cable tray type U and type C
Short answer
A perforated cable tray is a U- or C-section steel trough with a slotted base. The continuous base supports small cables along the whole route so they do not sag, while the slots keep air moving and make cable tying easy. The most common sizes on Indonesian projects are 100 x 50, 200 x 100, 300 x 100 and 400 x 100 mm.
- ISO 9001:2015
- Our partner manufacturer holds ISO 9001:2015 quality management system certification.
- 360 kg @ 2.5 m
- Independent laboratory load test: type W ladder 1,000 x 100, 2.0 mm thick, 10 mm deflection, NEMA VE 1 class 10A.
- HDG BS 729
- Hot-dip galvanized after fabrication, so cut edges and holes are coated too.
- 1.8 to 2.0 mm
- Hot-rolled SPHC steel sheet. The thickness is stated on every quotation.
Cable tray types
PGW-TC
Perforated cable tray type C
Side walls folded into a full C profile. Stiffer for wide trays and longer spans.
- Width
- 100 to 1,000 mm
- Height
- 50, 100 mm
- Best for
- Wide trays, Factories, Data centers
Available cable tray sizes
Standard length 3 m. Ask for a quotation on any size directly on WhatsApp, or send your full BOQ below.
| Width | Tray U H50 | Tray U H100 | Tray C H50 | Tray C H100 | Action |
|---|---|---|---|---|---|
| 100 mm | 100 x 50 | 100 x 100 | 100 x 50 | 100 x 100 | Request a quote |
| 150 mm | 150 x 50 | 150 x 100 | 150 x 50 | 150 x 100 | Request a quote |
| 200 mm | 200 x 50 | 200 x 100 | 200 x 50 | 200 x 100 | Request a quote |
| 250 mm | 250 x 50 | 250 x 100 | 250 x 50 | 250 x 100 | Request a quote |
| 300 mm | 300 x 50 | 300 x 100 | 300 x 50 | 300 x 100 | Request a quote |
| 350 mm | 350 x 50 | 350 x 100 | 350 x 50 | 350 x 100 | Request a quote |
| 400 mm | 400 x 50 | 400 x 100 | 400 x 50 | 400 x 100 | Request a quote |
| 450 mm | 450 x 50 | 450 x 100 | 450 x 50 | 450 x 100 | Request a quote |
| 500 mm | 500 x 50 | 500 x 100 | 500 x 50 | 500 x 100 | Request a quote |
| 600 mm | 600 x 50 | 600 x 100 | 600 x 50 | 600 x 100 | Request a quote |
| 700 mm | 700 x 50 | 700 x 100 | 700 x 50 | 700 x 100 | Request a quote |
| 800 mm | 800 x 50 | 800 x 100 | 800 x 50 | 800 x 100 | Request a quote |
| 900 mm | 900 x 50 | 900 x 100 | 900 x 50 | 900 x 100 | Request a quote |
| 1000 mm | 1000 x 50 | 1000 x 100 | 1000 x 50 | 1000 x 100 | Request a quote |
Fittings for every bend and branch
- Tray elbow90° flat bend, radius or diagonal.
- Tray teeThree-way branch.
- Tray crossFour-way branch.
- Tray reducerStraight reducer, or left and right offset reducer.
- Inside and outside riserRadius or diagonal type for changes in elevation.
Technical data
- Width (W)
- 100 to 1,000 mm
- Height (H)
- 50 and 100 mm
- Perforation
- Rows of oval slots in the base
- Splice
- Join set, 3/8 in or M8 bolts
- Material
- Hot-rolled sheet steel (SPHC)
- Sheet thickness
- 1.8 to 2.0 mm (other thicknesses to order)
- Standard length
- 3,000 mm per length
- Finish
- Hot-dip galvanized (BS 729, DIN 50976), electro-galvanized, powder coating
- Design reference
- NEMA VE 1 for cable tray and cable ladder
- Splice holes
- 10 x 14 mm slots, 25 and 50 mm from the end
Questions about cable tray
What is the difference between type U and type C cable tray?
Both are perforated troughs. Type U has straight side walls with a small lip, while type C folds the side wall into a C profile so the top edge is stiffer. Up to 300 mm wide, type U is sufficient. From 400 mm wide, or for longer support spans, consider type C.
Which cable tray sizes are used most?
On building and factory projects in Indonesia, 100 x 50, 200 x 50, 200 x 100, 300 x 100 and 400 x 100 mm are the most ordered sizes. To size a tray from the number and diameter of your cables, send us the cable schedule or use our tray size calculator (in Bahasa Indonesia).
Is the cover included with the cable tray?
No. Straight sections and covers are quoted as separate items per 3 m length, and our quotation lists both.
What is the right hanger or support spacing for cable tray?
Typically 1.5 to 2 m for 50 mm high tray and 2 to 2.5 m for 100 mm high tray, depending on the cable load. Place a support within 600 mm of every splice and of every fitting.
Send us your BOQ and we will prepare the quotation.
- 01
Send your requirements
A BOQ, layout drawings, site photos, or simply a list of sizes.
- 02
Receive a complete quotation
Straight sections, fittings, supports, clamps and bolts in one document, with the delivery cost.
- 03
Delivered to your site
Bundled by size and shipped from Bekasi to match your project schedule.
Fast replies during business hours · Monday to Friday 08:00 to 17:00, Saturday 08:00 to 13:00 (WIB, UTC+7)
Chat on WhatsApp nowOr fill in the short form
Once it is sent, you can continue straight to WhatsApp to share your BOQ file.